HSL
Schlenker HSL rotating inserts are designed and manufactured to offer maximum precision and reliability. By using them, you improve the processing quality and precision of your machines considerably.
HSL rotating inserts are pressed into the feed rod and additionally pinned if required. The bar feed collets are fastened to the rotating inserts via a cross pin.
| A | Outside diameter |
| B | Feed rod interface |
| Z | Cross Bore ID |
| P | Fit ID |
| L1 | Length L1 |
| L2 | Length L2 |
| L | Total length |
Infotable - Click to expand
| Article | Machine manufacturer | Ø A [mm] |
Ø B [mm] |
Ø P [mm] |
Ø Z [mm] |
L1 [mm] |
L2 [mm] |
L [mm] |
| L10 HSL | FMB, IEMCA, IRCO | 10,5 | 8 | 7 | 4 | 26,5 | 43,5 | 100 |
| L12 HSL | FMB, IEMCA, IRCO | 12,5 | 8 | 8 | 4 | 26,5 | 43,5 | 100 |
| L13 HSL | FMB, IEMCA, IRCO | 13,5 | 8 | 8 | 4 | 26,5 | 43,5 | 100 |
| L15 HSL | FMB, IEMCA, IRCO, TRAUB | 15 | 12 | 11 | 6 | 26,5 | 43,5 | 100 |
| L16 HSL | FMB, IEMCA, IRCO, TRAUB | 16 | 12 | 11 | 6 | 26,5 | 43,5 | 100 |
| L18 HSL | FMB, IEMCA, IRCO, TRAUB | 18 | 12 | 11 | 6 | 26,5 | 43,5 | 100 |
| L20 HSL | FMB, IEMCA, IRCO, TRAUB | 20 | 17 | 14 | 8 | 39 | 47 | 116 |
| L22 HSL | FMB, IEMCA, IRCO, TRAUB | 22 | 17 | 14 | 8 | 39 | 47 | 116 |
| L25 HSL | FMB, IEMCA, IRCO, TRAUB | 25 | 20 | 20 | 8 | 41,5 | 47,5 | 119 |
| L30 HSL | FMB, IEMCA, IRCO, TRAUB | 30 | 20 | 20 | 8 | 41,5 | 47,5 | 119 |
| L32 HSL | FMB, IEMCA, IRCO, TRAUB | 32 | 20 | 20 | 8 | 41,5 | 47,5 | 119 |
| L36 HSL | FMB, IEMCA, IRCO, TRAUB | 36 | 20 | 20 | 8 | 41,5 | 47,5 | 119 |
HSL
